10 Ways To Fix No Internet Secured

Wireless networking issues are typically simple to resolve. Although your computer is connected to the internet, you cannot access any web pages. You look in the PC tray for the Wi-Fi symbol and discover a small yellow triangle icon.

However, you may occasionally get a “No Internet Secured” warning notice that displays as a pop-up from the PC tray. This error message indicates a problem with wireless configuration or connectivity. It’s infuriating, but this system error is relatively simple to resolve.

The “No Internet Secured” error message is a very typical error message that appears from time to time due to a wireless networking problem. As a result, many people are perplexed because, despite being connected to your Wi-Fi network, you cannot access the internet. As a result, if you open an internet browser in this situation, no page loads.

When you click the network connection icon on your PC, the following warning appears beneath the name of your Wi-Fi router. Every internet user has encountered this mistake at some point and understands how inconvenient it can be. If you are experiencing a similar issue, we will walk you through the process of resolving the “No Internet Secured” error.

What Exactly Does “No Internet Secured” Mean?

Many Windows users may have noticed the error warning appear in the system tray area. But what exactly does “No Internet Secured” imply? The error message for Windows is somewhat ambiguous, and it usually indicates that your internet connection is down.

It can, however, show when you have an active internet connection. This is unsurprising, and the error appears to be purposefully ambiguous. After all, whether your PC is secure or not is meaningless if it no longer has an internet connection.

Other factors can also contribute to the appearance of the “No Internet Secured” message. While it can appear on any Windows PC, it is most commonly seen on Microsoft Surface tablets. If your PC uses the same network card, you may see it regardless.

A secure internet connection uses password protection and a secure encryption mechanism. No Internet Secured indicates that you have entered the correct network password and are connected to it.

The internet would not be accessible, however. While it is difficult to pinpoint particular causes for this problem, it could be related to changes in your IP configuration settings. This change in your IP settings could occur unintentionally and without your knowledge.

How to Fix “No Internet Secured” Error

1. Turn off your VPN

If you utilize a VPN network, you may receive the error “No Internet secured.” The VPN client’s built-in security settings may be creating the issue. There could be a kill switch in place that disconnects you from the internet connection whenever your VPN server fails.

First, you should try disconnecting your VPN using the disconnect feature to determine whether this is the issue. You can also disconnect from the VPN and verify your internet connection again. Visit a reputable website that is constantly updated, such as a news website.

If everything is in place and connected, your issue was with the VPN server. To resolve the problem, your VPN client must be updated. After that, you must connect to a new VPN server.

2. Updating the IP Configuration of Your System

If you’re not using a VPN and still receive the “No Internet secured” error, use the following commands to resolve the issue. Right-click on “Start,” then select “Windows PowerShell.” Else, you might also launch the “Command Prompt.” Then, in the following order, enter the commands:

ipconfig /release

No Internet Secured

ipconfig /renew

ipconfig /flushdns

netsh int ip reset

This will request that the router assign a new IP address to your PC, which should resolve your internet connectivity issue.

3. Examine the Connection Properties of Your System

If the “No internet secured” issue persists, you should inspect your PC’s network adapter. Navigate to the Wi-Fi connection icon in your system tray and select “Network & Internet Settings.”

Select “Change Adapter Options.” Then, navigate through the settings and right-click on the problematic connection. Click “Properties” and confirm the following fields:

Fix No Internet Secured

• Client for Microsoft Networks

• Microsoft Network File and Printer Sharing

• Packet Scheduler for QoS

• LLDP Protocol Driver from Microsoft

• I/O Driver for Link-layer Topology Discovery Mappers

• Responder to Link-layer Topology Discovery

• TCP/IPv4 (Internet Protocol Version 4).

• TCP/IPv6 (Internet Protocol Version 6).

Choose “Internet Protocol Version 4” and double-click it. Make sure that the IP Address and DNS Server are set to “Obtain Automatically.”

No Internet Secured

Now, click ‘OK’ to confirm all of your changes (if any) and restart Windows to see whether the “no internet secured” problem has been resolved.

4. Update Your Network Device Drivers

Your network device driver may be malfunctioning. As a result, you must upgrade it to ensure optimal internet connectivity.

1. To begin, right-click on the “Start” icon and select “Device Manager.”

2. Next, expand the “Network Adapters” section and select the network device that your WiFi is utilizing.

3. You can update the driver by right-clicking and choosing “Update driver” from the drop-down menu.

4. Your device driver will now be updated, and you will need to restart Windows. If the update is successful, Windows 10 will connect to the network automatically.

5. Otherwise, first select “Disable Device,” then reboot your system, and finally click “Enable Device.”

5. Launch the Network Troubleshooter

Running the troubleshooter is another option for resolving the error. You can test this when your machine is not connected to the internet. In Windows, you’ll find several troubleshooting tools and toolkits that automatically scan for faults and recommend repair methods.

If you want to run the Network Troubleshooter and fix the problem, simply follow these steps:

1. Simply press Windows key + “I.” This brings up the “Settings” menu. Alternatively, you can type Settings into the Start menu search field and select the best result.

2. Then, from the Windows Settings pop-up window, select “Network & Internet.”

3. Scroll to the bottom and select “Network Troubleshooter.”

4. If any problems are discovered, it will automatically correct them.

6. Turn off IPv6

Even though Internet Protocol Version 6 (IPv6) functions smoothly on most hardware platforms, it is prone to faults. You may be receiving the no internet secured error due to this. Fortunately, IPv6 may be readily disabled under “Network & Internet settings.” Uncheck the IPv6 option and click OK before restarting your system. The following are the steps you must take to do the same:

1. In your System Tray, click the search icon and type “Control Panel.” Then, when it appears in the search results, click on it.

2. The control panel window should now appear. The “View by” option is located towards the upper right corner. Change the option to “Large Icons.”

3. Next, select “Network and Sharing Center.”

4. Select “Change adapter settings.”

5. Select “Properties” from the context menu after right-clicking on the internet connection in question.

6. You will then be shown all of the objects utilized by that connection. Scroll to the “Internet Protocol Version 6 (TCP/IPv6)” option and uncheck it.

7. Click “OK,” and your IPv6 will be turned off.

7. Remove any apps that may be causing issues

Some customers have noticed that third-party programs installed on your system can cause the “No Internet Secured” error message to appear. This issue could be caused by software that manages your network connections. Furthermore, customers have discovered that deleting software such as ProSet resolves the issue notice. There are several methods for removing an app from your computer, but using uninstaller software is the best option.

8. Modify your Power Management Settings

At first sight, this may raise an eyebrow, but power settings might have an impact on your internet connection and may cause the “No Internet Secured” error message.

1. In your PC tray, go to the search option and type in Power.

2. Select the Power and Sleep options.

3. Look for related settings on the right side and choose “Additional Power Settings.”

4. A new window will now appear. Tick the box next to the plan name for which you want to change the settings.

Choose “Change Advanced Power Settings” from the drop-down menu.

6. Check that the Maximum Power Saving option is not enabled under the Wireless Adapter Settings section and Power Saving Mode.

Note: Please keep in mind that your device may be turned off at times to preserve Power. So, change this to performance mode and then click Apply.

9. Turn off Wi-Fi Hotspot and Wi-Fi Sharing software

Wi-Fi hotspots and Wi-Fi sharing software might cause network adapter configuration issues. If you’re using a Wi-Fi hotspot or Wi-Fi sharing software, consider updating or uninstalling it. If the problem “no internet, secured” appears after the upgrade or removal, disable non-Microsoft things from the network adapter.

1. Press the Windows Key + X.

2. Connect to the network.

3. Select Change adapter choices.

4. Select the Wi-Fi network by double-clicking it.

5. Click on Properties.

6. Turn off all non-Microsoft items.

7. Restart your computer.

10. Carry out a Winsock Reset

Another command-line remedy for the “No Internet, Secured” notice is resetting Winsock. Winsock is an abbreviation for the Windows Sockets API, which governs how your PC connects with network services such as the widely used TCP/IP. To reset Winsock, simply follow these steps:

1. Start the Run window by pressing the Windows and R keys simultaneously.

2. Type cmd and press the Enter key. The Command Prompt window will appear.

3. Type in the following command:

netsh winsock reset catalog

Allow a few moments for the network to reconnect automatically. Whether it doesn’t, try it manually and see if the problem has been rectified.


Why am I receiving a “No Internet Secured” error message?

A variety of factors could cause this error message. Perhaps your network adapters are out of date, or perhaps simply restarting your computer will solve the problem. Several remedies for the “No Internet Secured” problem are discussed in this article.

How Can I Resolve No Internet, Secured?

There could be several solutions to the No Internet Secured error. A few examples are disabling your virtual private network, changing IP configurations, updating network adapters, and so on.

What Does “No Internet, Secured” On Wi-Fi Mean?

When you attempt to connect to a Wi-Fi network, the No Internet Secured error means that you are connected to the internet network but cannot access the internet. There could be an issue with the router or your computer. Examine the solutions listed above to discover a better solution to your problem.

What Does the Term “No Internet Secured” Mean?

The secured aspect refers to user login credentials such as passwords and protected encryption technologies. No internet indicates that you are connected to the network but cannot access the internet.


If your problem has been resolved, you should have your internet connection up and running by now. However, if the problem persists, i.e., you are offline and receiving the error message, you should attempt temporarily connecting your device to another network to see whether the problem is actually with the prior network or not. You can hire an expert if nothing seems to be working.

Leave a Comment