Are you having problems with your Apple iPhone 12, which is stuck at the Apple logo? Then, in this post, we’ll show you how to swiftly and efficiently correct it. We’ll go over some of the ways you can use to troubleshoot your iPhone 12. In this article, we will discuss a few strategies that will assist you in resolving the issue.
If your iPhone 12 gets stuck on the Apple logo and does not fully boot up, it is likely due to a firmware issue. Most of the time, the firmware problem is minor, and it is simple to resolve because you can’t do much about an iphone that won’t start up entirely.
iPhone 12 stuck on Apple logo loop – Causes
When an iPhone is turned off and then restarted, it performs several checks to ensure the hardware and software are functioning properly. If your iPhone 12 detects a problem, it may become stuck at the Apple logo boot stage.
How to Fix iPhone 12 stuck on Apple logo loop
In case your iPhone 12 is stuck at the Apple logo, something went wrong during the boot process. It’s critical to troubleshooting this problem to determine if anything is drastically wrong with your device.
Let’s take a look at three methods you can use to power up your iPhone 12 effectively.
Solution 1: Force restart or hard reboot your iPhone 12 if it is stuck on the Apple logo
If your iPhone 12 unexpectedly freezes while booting up, a hard restart may be helpful. A force restart known as a hard reboot, differs from a typical reset in that it necessitates the use of a hardware key combination to restart the device. Because the standard soft reset includes using the touch screen to start up the phone, this is an intelligent way to reboot it.
1. Quickly hold down and release the Volume Up button.
2. Quickly press and release the Volume Down button.
3. Lastly, press and hold down the Side button for a few seconds until the Apple logo appears.
If the phone can finish the startup process and you were able to remove the stuck Apple logo, make sure to update the apps or software to remove any bugs/glitches that may have been causing the problem.
To update the apps, go to:
1. Open App Store from the Home screen.
2. In the bottom-left corner, tap the Today tab.
3. Then, tap on the user profile symbol in the top right corner of the screen.
4. You should see the account information.
5. Scroll down to the column under “Available Updates.”
6. To update individual apps, tap on Update next to the app.
7. Select Update All to update all apps at the same time.
To check for software updates, do the following:
1. Open the Settings app from the Home screen.
2. Select General.
3. Select Software Update.
4. Wait for the “Checking for Update” process to complete.
5. If available, select Download and Install. If no software updates are available, your phone is up to date.
Solution 2: Reboot your iPhone 12 into Recovery Mode
If a force restart does not cure the problem and you still have an iPhone 12 stuck on the Apple logo, entering recovery mode may help. This is a sophisticated method meant to address issues caused by software defects by eliminating damaged files and replacing them with an available iOS.
To do so, prepare a Mac or Windows computer with the most recent iTunes installed. Check that your computer is running the most recent operating system compatible with your iPhone. Once you’ve completed those steps, connect your device to the computer using the Apple-supplied USB/lightning cable. Then, if possible, allow iTunes to sync with your iPhone and backup files. Once your backup is safe, follow these steps to boot your iPhone 12 into recovery mode and then restore iOS in iTunes:
1. Quickly hold down and release the Volume Up button.
2. Quickly hold down and release the Volume Down button.
3. When prompted with the Connect to iTunes screen, press and hold the Power/Side button. When the Apple logo comes up, do not release the button since you must enter recovery mode.
4. When you enter recovery mode, you’ll be given the option to Update or Restore.
5. Choose Restore if you wish to reinstall and download iOS without wiping your data.
Do not unplug your phone yet; instead, keep it linked until the entire restoration process is completed. You have the option to disconnect if prompted.
Solution 3: Restore your iPhone 12 in DFU Mode
Device Firmware Update, often known as DFU mode restore, is the most in-depth type of restore you can perform on an iPhone. It allows you to connect to iTunes and bypass the automated Update. That is, you can alter the firmware version to any version you wish because it allows your device to communicate with iTunes even if the bootloader is not synced or activated.
It is also vital to remember that you can only use this approach if your phone has not suffered any damage, either physical or water damage, as doing so may result in a permanently shattered iPhone.
1. Use the included USB/Lightning cable to connect your iPhone 12 to the computer. Open iTunes on your PC once you’ve connected.
2. Quickly hold down and release the Volume Up button.
3. Quickly press and release the Volume down button.
4. Hold the Side/Power button down until the screen goes black.
5. When the screen goes black, press and hold the Volume down button while continuing to hold down the Power/Side button.
6. Wait 5 seconds before releasing the Power/Side button but continue to hold the Volume Down button until your iPhone 12 appears in iTunes.
7. Once you see your iPhone in iTunes, release the Volume down button and follow the rest of the on-screen instructions to begin restoring your iPhone via iTunes.
If the screen does not go black, you did not successfully enter DFU mode. Repeat the process until you’ve nailed it.
Is your iPhone still broken?
Contact Apple’s service team if you’ve tried all of the above alternatives, and your iPhone 12 is still stuck on the Apple logo during bootup. They can make the necessary repairs and will assist you.
Make an appointment to get in-person support if an Apple store is nearby. You may avoid huge waits at the Apple Store by making an appointment ahead of time. A technician can then make a free diagnosis and provide you with a repair estimate. If your iPhone is still under warranty, you can get a free repair or replacement.
Contact Apple’s mail-in repair service at 1-800-MY-APPLE (1-800-692-7753) or visit Apple’s website if you require remote assistance.